Ko te Poari Porowhita Taa te kohatu kokonga o nga hua hiko, he mea nui kia pai te rere o o hua mo te wa roa kaore ranei.Ka rite ki te PCB ngaio me te PCB Runanga kaihanga, PCBFuture hoatu he uara nui i runga i te kounga o nga papa iahiko.
Ko te PCBFuture ka tiimata mai i te umanga Hangahanga PCB, katahi ka toro atu ki te huihuinga PCB me nga ratonga rapu waahanga, kua noho inaianei ko tetahi o nga kaihanga huihuinga PCB pai rawa atu.Ka whakapau kaha matou ki te whakangao i nga taputapu matatau mo te hangarau pai ake, te whakapai ake i te punaha o roto kia pai ake te mahi, te whakamana i nga kaimahi kia pai ake nga pukenga.
| Tukanga | Tūemi | Te Kaha Tukatuka | |
| Nga korero turanga | Te kaha o te whakaputa | Tatau apa | 1-30 paparanga |
| Tuohu me te whiri | 0.75% paerewa, 0.5% matatau | ||
| Min.kua oti te rahi PCB | 10 x 10mm(0.4 x 0.4") | ||
| Max.kua oti te rahi PCB | 530 x 1000mm(20.9 x 47.24 ") | ||
| Perehi maha mo nga vias matapo/tanumia | Maha-perehi Cycle≤3 wa | ||
| Kua oti te matotoru o te papa | 0.3 ~ 7.0mm(8 ~ 276mil) | ||
| Kua oti te whakamarumaru o te matotoru o te papa | +/-10% paerewa, +/-0.1mm matatau | ||
| Whakamutu mata | HASL, HASL kore utu, Koura koura, ENIG, Whakakikorua koura pakeke, OSP, Tiini Rumaki, hiriwa Rumaki, aha atu | ||
| Whakamutunga mata whiriwhiri | ENIG+Mahao koura, Maama koura+Mahao koura | ||
| Momo Rawa | FR4, Aluminium, CEM, Rogers, PTFE, Nelco, Polyimide / Polyester, etc. | Ka taea hoki te hoko i nga rauemi hei tono | |
| Pepa parahi | 1/3oz ~ 10oz | ||
| Momo Prepreg | FR4 Prepreg, LD-1080(HDI) | 106, 1080, 2116, 7628, etc. | |
| Whakamatau Whakapono | Te kaha tihorea | 7.8N/cm | |
| Te whakapoapoa | 94V-0 | ||
| Te poke katote | ≤1ug/cm² | ||
| Min.te matotoru dielectric | 0.075mm(3mil) | ||
| Te aukati i te aukati | +/-10%, min ka taea te whakahaere +/- 7% | ||
| Paparanga o roto&papa Whakawhiti Atahanga | Te Kaha Miihini | Miihini horoi | Te matotoru rauemi: 0.11 ~ 3.2mm(4.33mil ~ 126mil) |
| Rahi rauemi: min.228 x 228mm(9 x 9") | |||
| Laminator, Whakaaturanga | Te matotoru rauemi: 0.11 ~ 6.0mm(4.33 ~ 236mil) | ||
| Rahi rawa: min 203 x 203mm(8 x 8"), te teitei 609.6 x 1200mm(24 x 30") | |||
| Raina Etching | Te matotoru rauemi: 0.11 ~ 6.0mm(4.33mil ~ 236mil) | ||
| Rahi rauemi: min.177 x 177mm(7 x 7") | |||
| Paparanga o roto Te Kaha Tukatuka | Min.te whanui raina o roto/mokowā | 0.075/0.075mm(3/3mil) | |
| Min.te mokowhiti mai i te mata poka ki te kawe | 0.2mm(8mil) | ||
| Min.mowhiti annular paparanga o roto | 0.1mm(4mil) | ||
| Min.whakawātea whakawāteatanga o roto | 0.25mm(10mil) paerewa, 0.2mm(8mil) matatau | ||
| Min.te mokowhiti mai i te mata o te papa ki te kawe | 0.2mm(8mil) | ||
| Min.te whanui mokowhiti i waenganui i te whenua parahi | 0.127mm(5mil) | ||
| Whakakorehia te matotoru parahi mo te matua o roto | H/1oz, 1/2oz | ||
| Max.kua oti te matotoru parahi | 10oz | ||
| Paparanga o-waho Te Kaha Tukatuka | Min.te whanui o te raina o waho/te mokowā | 0.075/0.075mm(3/3mil) | |
| Min.rahi papa poka | 0.3mm(12mil) | ||
| Te Kaha Tukatuka | Max.rahi tetent slot | 5 x 3mm(196.8 x 118mil) | |
| Max.te rahi o te poka teneti | 4.5mm(177.2mil) | ||
| Min.whanui whenua teneti | 0.2mm(8mil) | ||
| Min.mowhiti annular | 0.1mm(4mil) | ||
| Min.BGA pitch | 0.5mm(20mil) | ||
| AOI | Te Kaha Miihini | Orbotech SK-75 AOI | Te matotoru rauemi: 0.05 ~ 6.0mm(2 ~ 236.2mil) |
| Rahi rauemi: max.597 ~ 597mm(23.5 x 23.5") | |||
| Orbotech Ves Miihini | Te matotoru rauemi: 0.05 ~ 6.0mm(2 ~ 236.2mil) | ||
| Rahi rauemi: max.597 ~ 597mm(23.5 x 23.5") | |||
| Te keri | Te Kaha Miihini | MT-CNC2600 Miihini Drill | Te matotoru rauemi: 0.11 ~ 6.0mm(4.33 ~ 236mil) |
| Rahi rauemi: max.470 ~ 660mm(18.5 x 26") | |||
| Min.te rahi o te wiri: 0.2mm(8mil) | |||
| Te Kaha Tukatuka | Min.rahi moka drill maha-hit | 0.55mm(21.6mil) | |
| Max.āhuatanga ōwehenga(kua oti te rahi o te poari VS te rahi Drill) | 12:01 | ||
| Te waatea ki te waahi poka (whakaritea ki te CAD) | +/-3mil | ||
| Poka porotiti | PTH&NPTH, Koki runga 130°, Runga diameter <6.3mm | ||
| Min.te mokowhiti mai i te mata poka ki te kawe | 0.2mm(8mil) | ||
| Max.rahi moka wiri | 6.5mm(256mil) | ||
| Min.rahi mokamoka maha-hit | 0.45mm(17.7mil) | ||
| Te rahi o te poka mo te pai o te perehi | +/-0.05mm(+/-2mil) | ||
| Min.PTH mokamoka rahi kātakí | +/-0.15mm(+/-6mil) | ||
| Min.NPTH rahi mokamoka kātakí | +/-2mm(+/-78.7mil) | ||
| Min.te mokowhiti mai i te pito o te kohao ki te kawe (Matapo vias) | 0.23mm(9mil) | ||
| Min.rahi drill taiaho | 0.1mm(+/-4mil) | ||
| Countersink koki poka&Diameter | Top 82,90,120° | ||
| Tukanga Mākū | Te Kaha Miihini | Paewhiri&Raina whakakikorua Tauira | Te matotoru rauemi: 0.2 ~ 7.0mm(8 ~276mil) |
| Rahi rauemi: max.610 x 762mm(24 x 30") | |||
| Mahinga Whakakore | Te matotoru rauemi: 0.2 ~ 7.0mm(8 ~276mil) | ||
| Rahi rauemi: min.203 x 203mm(8" x 8") | |||
| Raina Desmear | Te matotoru rauemi: 0.2mm ~ 7.0mm(8 ~276mil) | ||
| Rahi rauemi: max.610 x 762mm(24 x 30") | |||
| Raina whakakikorua tine | Te matotoru rauemi: 0.2 ~ 3.2mm(8 ~126mil) | ||
| Rahi rauemi: max.610 x 762mm(24 x 30") | |||
| Te Kaha Tukatuka | Te matotoru parahi pakitara poka | toharite 25um(1mil) paerewa | |
| Te matotoru parahi kua oti | ≥18um(0.7mil) | ||
| Min te whanui raina mo te tohu tohu | 0.2mm(8mil)) | ||
| Max.kua oti te taumaha parahi mo nga papa o roto&waho | 7oz | ||
| Te matotoru parahi rereke | H/1oz,1/2oz | ||
| Ko te Matapihi Solder & Silkscreen | Te Kaha Miihini | Miihini horoi | Te matotoru rauemi: 0.5 ~ 7.0mm(20 ~ 276mil) |
| Rahi rauemi: min.228 x 228mm(9 x 9") | |||
| Whakaaturanga | Te matotoru rauemi: 0.11 ~ 7.0mm(4.3 ~ 276mil) | ||
| Rahi rauemi: max.635 x 813mm(25 x 32") | |||
| Whakawhanakehia te miihini | Te matotoru rauemi: 0.11 ~ 7.0mm(4.3 ~ 276mil) | ||
| Rahi rauemi: min.101 x 127mm(4 x 5") | |||
| Tae | Tae kanohi konohono | Kakariki, matte matomato, kowhai, pango, puru, whero, ma | |
| Te tae hiraka | Ma, kowhai, pango, puru | ||
| Te kaha o te kanohi kanohi Solder | Min.te whakatuwhera kanohi konuhia | 0.05mm(2mil) | |
| Max.mono ma te rahi | 0.65mm(25.6mil) | ||
| Min.te whanui mo te kapi raina na S/M | 0.05mm(2mil) | ||
| Min.te whanui o nga korero pakiwaitara | 0.2mm(8mil) paerewa, 0.17mm(7mil) matatau | ||
| Min.te matotoru kanohi konuhono | 10um(0.4mil) | ||
| Ko te matotoru o te kanohi mo te ma te teneti | 10um(0.4mil) | ||
| Min.waro hinu raina whanui/mokowā | 0.25/0.35mm(10/14mil) | ||
| Min.kaiwhai waro | 0.06mm(2.5mil) | ||
| Min.tohu raina hinu waro | 0.3mm(12mil)) | ||
| Min.mokowhiti mai i te tauira waro ki nga papa | 0.25mm(10mil) | ||
| Min.te whanui mo te raina taupoki kanohi tihorea / papa | 0.15mm(6mil) | ||
| Min.solder mask whanui piriti | 0.1mm(4mil)) | ||
| Korehu whakakikorua Te pakeke | 6H | ||
| Te Maamaa Tihorea | Min.te mokowhiti mai i te tauira kanohi peelable ki te papa | 0.3mm(12mil)) | |
| Max.te rahi mo te poka teneti tihorea (Ma te panui mata) | 2mm(7.8mil) | ||
| Max.te rahi mo te poka teneti tihorea (Ma te ta konumohe) | 4.5mm | ||
| Te matotoru kanohi tihorea | 0.2 ~ 0.5mm(8 ~20mil) | ||
| Te Maama Hiraka | Min.te whanui raina hiraka | 0.11mm(4.5mil) | |
| Min.teitei raina hiraka | 0.58mm(23mil) | ||
| Min.mokowhiti mai i te pakiwaitara ki te papa | 0.17mm(7mil) | ||
| Whakaoti Mata | Te Whakaoti Mata | Max.roa maihao koura | 50mm(2") |
| ENIG | 3 ~ 5um(0.11 ~ 197mil) nickel, 0.025 ~ 0.1um(0.001 ~ 0.004mil) koura | ||
| maihao koura | 3 ~ 5um(0.11 ~ 197mil) nickel, 0.25 ~ 1.5um(0.01 ~ 0.059mil) koura | ||
| HASL | 0.4um(0.016mil) Sn/Pb | ||
| HASL Miihini | Te matotoru rauemi: 0.6 ~ 4.0mm(23.6 ~ 157mil) | ||
| Rahi rawa: 127 x 127mm ~ 508 x 635mm(5 x 5" ~ 20 x 25") | |||
| Te whakakikorua koura pakeke | 1-5u" | ||
| Tin Rumaki | 0.8 ~ 1.5um(0.03 ~ 0.059mil) Tin | ||
| Hiriwa Rumaki | 0.1 ~ 0.3um(0.004 ~ 0.012mil) Ag | ||
| OSP | 0.2 ~ 0.5um(0.008 ~ 0.02mil) | ||
| E-Whakamatau | Te Kaha Miihini | Rere tirotiro whakamatautau | Te matotoru rauemi: 0.4 ~ 6.0mm(15.7 ~ 236mil) |
| Rahi rauemi: max.498 x 597mm(19.6 ~ 23.5") | |||
| Min.te mokowhiti mai i te papa whakamatautau ki te tapa papa | 0.5mm(20mil) | ||
| Min.ātete kawe | 5Ω | ||
| Max.ātete whakawetiweti | 250mΩ | ||
| Max.ngaohiko whakamatautau | 500V | ||
| Min.te rahi o te papa whakamatautau | 0.15mm(6mil)) | ||
| Min.papa whakamatautau ki te mokowhiti papa | 0.25mm(10mil) | ||
| Max.whakamātautau o nāianei | 200mA | ||
| Te whakakitenga | Te Kaha Miihini | Momo tohu | Ararere NC, tapatapahi V, ripa mokamoka, kohao pane |
| Mīhini ararere NC | Te matotoru rauemi: 0.05 ~ 7.0mm(2 ~ 276mil) | ||
| Rahi rauemi: max.546 x 648mm(21.5 x 25.5") | |||
| Mīhini tapatapahi V | Te matotoru rauemi: 0.6 ~ 3.0mm(23.6 ~ 118mil) | ||
| Te whanui rawa mo te tapahi-V: 457mm(18") | |||
| Te Kaha Tukatuka | Min.te rahi moka ararere | 0.6mm(23.6mil) | |
| Min.whakahuahua te manawanui | +/-0.1mm(+/-4mil) | ||
| Momo koki tapatapahi V | 20°, 30°, 45°, 60° | ||
| V-tapahia koki kātakí | +/-5° | ||
| V-tap rehitatanga katakina | +/-0.1mm(+/-4mil) | ||
| Min.mokowhiti maihao koura | +/-0.15mm(+/-6mil) | ||
| Te aro o te koki koki | +/-5° | ||
| Ka noho tonu te bevelling ki te matotoru | +/-0.127mm(+/-5mil) | ||
| Min.pūtoro o roto | 0.4mm(15.7mil) | ||
| Min.mokowhiti mai i te kawe ki te whakahuahua | 0.2mm(8mil) | ||
| Whakaaetanga hohonu o Countersink/Counterbore | +/-0.1mm(+/-4mil) | ||